配置网卡bond

1. 创建主接口

nmcli con add type bond con-name bond0 ifname bond0 mode active-backup

2. 给主接口分配ip地址

nmcli con mod bond0  ipv4.addresses '11.16.25.100/24'

nmcli con mod bond0  ipv4.method manual

nmcli con mod bond0 connection.autoconnect yes

3. 创建从接口

nmcli con add type bond-slave ifname eno1 master bond0

nmcli con add type bond-slave ifname eno2 master bond0

4. 开启主接口和从接口

nmcli con up bond-slave-eno2

nmcli con up bond-slave-eno1

nmcli con up bond0

网卡teaming配置

#nmcli con add type team con-name team0 ifname team0 config '{"runner": {"name": "activebackup"}}'

#nmcli con mod team0 ipv4.addresses '192.168.0.100/24'

#nmcli con mod team0 ipv4.method manual

#nmcli con add type team-slave con-name team0-port1 ifname eno1 master team0

#nmcli con add type team-slave con-name team0-port2 ifname eno2 master team0

#teamdctl team0 state（查看状态）